Nissan Ariya: All-Wheel Drive (AWD) system
Nissan Ariya (FE0) 2023-2025 Owner's Manual / Starting and driving / All-Wheel Drive (AWD) system
WARNING
CAUTION
Do not operate the EV system on a
free roller when any of the wheels
raised.
When the vehicle is in the P (Park) position,
the operation noise may be heard
from the lower part of the vehicle. This is
not a malfunction.
Parking/parking on hills

WARNING
- Do not stop or park the vehicle
over flammable materials such as
dry grass, waste paper or rags.
They may ignite and cause a fire.
- Never leave the vehicle in the
READY to drive mode while the
vehicle is unattended.
- Do not leave children unattended
inside the vehicle. They could
unknowingly activate switches or
controls. Unattended children
could become involved in serious
accidents.
- To help avoid risk of injury or
death through unintended operation
of the vehicle and/or its
systems, do not leave children,
people who require the assistance
of others or pets unattended
in your vehicle.
Additionally, the temperature
inside a closed vehicle on a warm
day can quickly become high
enough to cause a significant risk
of injury or death to people and
pets.
- Safe parking procedures require
that both the parking brake be
applied and the transmission
placed into P (Park). Failure to do
so could cause the vehicle to
move unexpectedly or roll away
and result in an accident.
- Make sure the shift lever cannot
be moved without depressing the
foot brake pedal.
1. Apply the parking brake.
2. Push the park button to shift to the P
(Park) position.
3. To help prevent the vehicle from
rolling into the street when parked on
a sloping drive way, it is a good practice
to turn the wheels as illustrated.
- HEADED DOWNHILL WITH CURB: 1
Turn the wheels into the curb and
move the vehicle forward until the
curb side wheel gently touches the
curb.
- HEADED UPHILL WITH CURB: 2
Turn the wheels away from the curb
and move the vehicle back until the
curb side wheel gently touches the
curb.
- HEADED UPHILL OR DOWNHILL, NO
CURB: 3
Turn the wheels toward the side of
the road so the vehicle will move
away from the center of the road if it
moves.
4. Place the power switch in the OFF
position.