Nissan Ariya: Door Lock Actuator

• Driver Side

Driver Side

Diagnosis Procedure

CHECK DOOR LOCK ACTUATOR INPUT SIGNAL

1. Power switch OFF.

2. Disconnect front door lock assembly (driver side) connector.

3. Check voltage between front door lock assembly (driver side) harness connector and ground.

   (+)		(–)	Condition		Voltage
   Front door lock assembly (driver side)
   Connector	Terminal
   D65	2	Ground	Door lock and unlock switch	Lock	9 – 16 V
   	1			Unlock

Is the inspection result normal?

Replace front door lock assembly (driver side). Refer to Removal & Installation.

GO TO 2.

CHECK DOOR LOCK ACTUATOR CIRCUIT

1. Disconnect BCM and rear door lock assembly LH connector.

2. Check continuity between BCM harness connector and front door lock assembly (driver side) harness connector.

   BCM		Front door lock assembly (driver side)		Continuity
   Connector	Terminal	Connector	Terminal
   B14	134	D65	1	Existed
   	142		2

3. Check continuity between BCM harness connector and ground.

   BCM		—	Continuity
   Connector	Terminal
   B14	134	Ground	Not existed
   	142

Is the inspection result normal?

GO TO 3.

Repair or replace harness.

CHECK BCM OUTPUT SIGNAL

1. Connect BCM connector.

2. Check voltage between BCM harness connector and ground.

Is the inspection result normal?

INSPECTION END

Replace BCM. Refer to Removal and Installation.

Back Door SwitchSymptom Diagnosis