Nissan Ariya: Symptom Diagnosis

• Heated Steering Wheel System Does Not Activate
• Noise, Vibration and Harshness (nvh) Troubleshooting

Heated Steering Wheel System Does Not Activate

Symptom Description

• The heated steering wheel does not warm up.

• The heated steering wheel system cannot be turned OFF.

Diagnosis Procedure

PERFORM SELF-DIAGNOSIS

With CONSULT

1. Power switch ON.

2. Select “Self Diagnostic Result” mode of “HVAC” using CONSULT.

3. Check DTC.

Is DTC detected?

B24F4-12 is detected.>>

Refer to Diagnosis Procedure.

B24F4-14 is detected.>>

Refer to Diagnosis Procedure.

NO>>

GO TO 2.

CHECK POWER SOURCE AND GROUND CIRCUIT

1. Power switch OFF.

2. Remove the heated steering wheel. Refer to STEERING WHEEL : Removal & Installation .

3. Power switch ON.

4. Turn heated steering wheel switch ON.

5. Check voltage between steering wheel harness connector terminals.

   steering wheel			Condition	Voltage (Approx.)
   Connector	Terminal
   M304	44 − 43		Within 30 seconds after turning ON the heated steering switch.	Battery voltage
   			Other conditions.	0 V

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

GO TO 4.

CHECK HEATED STEERING WHEEL

Check heated steering wheel. Refer to Component Inspection.

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Replace heated steering wheel. Refer to STEERING WHEEL : Removal & Installation .

CHECK GROUND CIRCUIT

Check continuity between steering wheel harness connector terminal and ground.

Steering wheel		Ground	Continuity
Connector	Terminal
M304	43		Existed

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Repair or replace damaged parts.

CHECK HARNESS BETWEEN HEATED STEERING WHEEL RELAY AND STEERING WHEEL

1. Power switch OFF.

2. Disconnect heated steering wheel relay connector. Refer to Component Parts Location.

3. Disconnect steering wheel connector.

4. Check continuity between heated steering wheel relay harness connector terminal and steering wheel harness connector terminal.

   Heated steering wheel relay		Steering wheel		Continuity
   Connector	Terminal	Connector	Terminal
   M118	5	M304	44	Existed

5. Check continuity between heated steering wheel relay harness connector terminal and ground.

   Heated steering wheel relay		Ground	Continuity
   Connector	Terminal
   M118	5		Not existed

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

Repair or replace damaged parts.

CHECK HEATED STEERING WHEEL RELAY

Check heated steering wheel relay. Refer to Component Inspection.

Is the inspection result normal?

YES>>

GO TO 7.

NO>>

Replace heated steering wheel relay. Refer to Component Parts Location.

DETECT MALFUNCTIONING ITEM

Check the following.

• Battery

• Harness for short or open between battery and 10A fuse (No. 70).

• Harness for short or open between battery and 10A fuse (No. 82).

• 10A fuse (No. 70).

• 10A fuse (No. 82).

Is the inspection result normal?

YES>>

GO TO 7.

NO>>

Repair or replace damaged parts.

CHECK HARNESS BETWEEN HEATED STEERING WHEEL RELAY AND A/C AMP.

1. Check continuity between heated steering wheel relay harness connector terminal and A/C amp. harness connector terminal.

   Heated steering wheel relay		A/C amp.		Continuity
   Connector	Terminal	Connector	Terminal
   M118	2	M1	56	Existed

2. Check continuity between heated steering wheel relay harness connector terminal and ground.

   Heated steering wheel relay		Ground	Continuity
   Connector	Terminal
   M118	2		Not existed

Is the inspection result normal?

YES>>

GO TO 8.

NO>>

Repair or replace damaged parts.

CHECK HARNESS BETWEEN HEATED STEERING RELAY AND FUSE BLOCK (J/B)

1. Check continuity between heated steering wheel relay harness connector terminal and fuse block (J/B) connector terminal.

   Heated steering wheel relay		Fuse block (J/B		Continuity
   Connector	Terminal	Connector	Terminal
   M118	1	M74	81	Existed

2. Check continuity between heated steering wheel relay harness connector terminal and ground.

   Heated steering wheel relay		Ground	Continuity
   Connector	Terminal
   M118	1		Not existed

Is the inspection result normal?

YES>>

Replace A/C amp. Refer to Removal and Installation.

NO>>

Replace integrated interface display. Refer to Removal and Installation.

Noise, Vibration and Harshness (nvh) Troubleshooting

NVH Troubleshooting Chart

Use the chart below to find the cause of the symptom. If necessary, repair or replace these parts.

Possible cause and suspected parts	Symptom					Reference
	Steering
	Noise	Shake	Vibration	Shimmy	Judder
Outer/inner socket ball joint rotating torque	×	-	-	-	-	-
Outer/ inner socket ball joint swinging force	×	-	-	-	-	Refer to STEERING GEAR AND LINKAGE : Inspection.
Outer/inner socket ball joint end play	×	-	-	-	-
Steering wheel play	×	-	-	-	-	Refer to STEERING WHEEL : Periodic Maintenance Operation.
Improper steering wheel	-	×	×	×	-	-
Mounting looseness	-	×	×	×	×	Refer to STEERING WHEEL : Exploded View Refer to STEERING COLUMN : Exploded View. Refer to STEERING GEAR AND LINKAGE : Exploded View.
Steering column deformation or damage	×	-	×	-	-	Refer to STEERING COLUMN : Inspection.
Improper installation or looseness of steering column	×	-	×	-	-	Refer to STEERING COLUMN : Exploded View.
Steering gear and linkage looseness	-	-	-	×	×	Refer to STEERING GEAR AND LINKAGE : Exploded View.
Front axle	×	×	×	×	×	Refer to NVH Troubleshooting Chart.
Front drive Shaft	×	×	×	-	-
Rear axle	×	×	×	×	×	Refer to NVH Troubleshooting Chart.
Front suspension	×	×	×	×	×	Refer to NVH Troubleshooting Chart.
Rear suspension	×	×	×	×	×	Refer to NVH Troubleshooting Chart.
Tire	×	×	×	×	×	Refer to NVH Troubleshooting Chart.
Road Wheel	×	×	-	×	×
Brake	×	×	-	×	×	Refer to NVH Troubleshooting Chart.