Nissan Ariya: Removal and Installation

• Chassis Control Module
• Automatic Brake Hold Switch

Chassis Control Module

CHASSIS CONTROL MODULE : Removal & Installation

REMOVAL

CAUTION:

When replacing chassis control module, configuration of chassis control module is required. Refer to Work Procedure.

Remove the instrument panel. Refer to Work Procedure.

Disconnect chassis control module harness connector.

Remove the chassis control module.

CAUTION:

Never drop the chassis control module.

INSTALLATION

Note the following, install in the reverse order of removal.

• When replacing the chassis control module, be sure to perform the configuration of chassis control module. Refer to Work Procedure.

Automatic Brake Hold Switch

AUTOMATIC BRAKE HOLD SWITCH : Removal & Installation

REMOVAL

1. Remove instrument lower panel. Refer to Removal & Installation.

2. Remove switch bracket mounting screw and remove automatic brake hold switch bracket from instrument lower panel.

   

3. Remove automatic brake hold switch from switch bracket.

INSTALLATION

Install in the reverse order of removal.

Component Parts /circuit DiagnosisE-Step