Nissan Ariya: Basic Inspection. Diagnosis and Repair Work Flow

Work Flow

DETAILED FLOW

OBTAIN INFORMATION ABOUT SYMPTOM

Interview the customer to obtain as much malfunction information (conditions and environment when the malfunction occurred) as possible when the customer brings the Nissan Ariya vehicle in.

GO TO 2.

REPRODUCE THE MALFUNCTION INFORMATION

Check the malfunction on the Nissan Ariya vehicle that the customer describes.

Inspect the relation of the symptoms and the condition when the symptoms occur.

GO TO 3.

IDENTIFY THE MALFUNCTIONING SYSTEM WITH “SYMPTOM DIAGNOSIS”

Use “Symptom diagnosis” from the symptom inspection result in step 2. Then identify where to start the diagnosis based on possible causes and symptoms.

GO TO 4.

IDENTIFY MALFUNCTIONING PARTS WITH “COMPONENT DIAGNOSIS”

Perform the diagnosis with “Component diagnosis” of the applicable system.

GO TO 5.

REPAIR OR REPLACE THE MALFUNCTIONING PARTS

Repair or replace the specified malfunctioning parts.

GO TO 6.

FINAL CHECK

Check that malfunctions are not reproduced when obtaining the malfunction information from the customer, referring to the symptom inspection result in step 2.

Is the malfunctioning part repaired or replaced?

INSPECTION END

GO TO 2.

SystemDtc/circuit Diagnosis