Nissan Ariya: Description

• Outline
• Component Parts
• System
• Diagnosis System (lbc). Consult Function

Diagnosis System (lbc). Consult Function

Diagnosis Description

APPLICATION ITEM

CONSULT performs the following functions by communicating with Li-ion battery controller (LBC).

X: Applicable

*: The following diagnosis information is erased when LBC memory is erased.

• DTC

• Freeze frame data (FFD)

SELF DIAGNOSIS RESULTS

• DTC Item

  • For the item “DTC and 1st trip DTC", Refer to DTC Index.

• How to read DTC and 1st trip DTC

  DTC and 1st trip DTC related to the malfunction are displayed on "Self Diagnostic Results" mode of CONSULT. "TIME" indicates the number of times the Nissan Ariya vehicle has been driven since the last DTC was detected.

  • If DTC is currently detected, the “TIME” is displayed as “0”.

  • When LBC stores 1st trip DTC, “TIME” is displayed as “1t”.

  • DTCs with “TIME” other than “0” or “1t” are defected that was occurred in the past.

• How to Erase DTC

  NOTE:

  If power switch remains ON after repair work, check that power switch in turned OFF.

  Then, wait for 10 seconds or more, and turn ON again.

  NOTE:

  Erase DTC in order first "HIGH VOLTAGE BATTERY 2" then next "HIGH VOLTAGE BATTERY".

  1. Select “HIGH VOLTAGE BATTERY 2” with CONSULT.

  2. Select “Self Diagnostic Results” mode.

  3. Touch “ERASE”. [DTC stored in LBC (Sub CPU) is erased.]

  4. Select “HIGH VOLTAGE BATTERY” with CONSULT.

  5. Select “Self Diagnostic Results” mode.

  6. Touch “ERASE”. [DTC stored in LBC (Main CPU) is erased.]

• Freeze frame data (FFD) and freeze frame data of 1st trip DTC

  HIGH VOLTAGE BATTERY (Main CPU)

  Monitored item	Unit	Remark
  Odometer/Trip meter	Km	ODO/TRIP meter at the moment a DTC is detected is displayed.
  Diagnostic trouble code count	count	Displays the number of DTC detections.
  SOC input calculated value	%	Displays SOC calculated value
  Battery SOC	%	Displays battery charge level (SOC)
  Total battery voltage	V	Displays total voltage of the Li-ion battery
  Maximum cell voltage	V	Displays the highest cell voltage in each cell.
  Maximum voltage cell No	—	Displays cell No. of highest voltage cell. NOTE: Cell No. is shown 0 to 95. For comparison, Refer to Component Description.
  Minimum cell voltage	V	Displays the lowest cell voltage in each cell.
  Minimum voltage cell No	—	Displays cell No. of lowest voltage cell. NOTE: Cell No. is shown 0 to 95. For comparison, Refer to Component Description.
  Battery current	A	Displays current value of Li-ion battery
  Maximum available power	kW	Displays maximum effective power.
  Power supply voltage	V	Displays 12 V power supply voltage to LBC
  Average temperature	°C	Displays average temperature of each module
  Lowest module temperature	°C	Displays lowest temperature of module.
  Highest module temperature	°C	Displays highest temperature of module.
  Maximum Charge Power	kW	Displays maximum charge power
  Water temperature sensor voltage	V	Displays voltage of water temperature sensor
  CPU temperature	°C	Displays CPU temperature of LBC
  CPU power supply voltage	V	Displays CPU power supply voltage of LBC
  Water temperature	°C	Displays battery coolant temperature
  Interlock switch 1	Off/On/Short to power/Resistance NG/Short to ground	Displays lock status between high voltage harness (FR) and service plug
  Highest temperature module	°C	Displays module No. that shows maximum temperature.
  Lowest temperature module	°C	Displays module No. that shows minimum temperature.
  LBC status	0 – 9	Displays control status of LBC 0: No request 1: During normal charge 4: During state transition 5: During driving 6: During initialization 7: During quick charge (Type 1) 9: During quick charge (Type 2)
  CPU reset status	ROM error/Stack error/CPU trap/Software/Watchdog 0/Watchdog 1/External input/Flash security/Irregular	Displays reset status of main CPU
  Relay status	Pre-charge/On/Off/Operating/Relay P check/Relay N check	Displays status of each relay
  Nissan Ariya Vehicle total distance	km	Displays mileage (km) of Nissan Ariya vehicle
  Power switch ON time	min	Displays duration of power switch ON (min.)
  ASIC internal error (ALU)	OK/NG	Displays malfunction status of ASIC internal circuit.
  ASIC internal error (ALHVUV)	OK/NG	Displays malfunction status of ASIC internal circuit.
  ASIC internal error (HVMUXSWOC)	OK/NG	Displays malfunction status of ASIC internal circuit.
  ASIC internal error (VPTAT)	OK/NG	Displays malfunction status of ASIC internal circuit.
  ASIC internal error (ADCL)	OK/NG	Displays malfunction status of ASIC internal circuit.
  ASIC internal error (ADCH)	OK/NG	Displays malfunction status of ASIC internal circuit.
  ASIC internal error (LSAMP)	OK/NG	Displays malfunction status of ASIC internal circuit.
  ASIC internal error (VAA)	OK/NG	Displays malfunction status of ASIC internal circuit.
  ASIC internal error (RefV)	OK/NG	Displays malfunction status of ASIC internal circuit.
  ASIC internal error (OTemp)	OK/NG	Displays malfunction status of ASIC internal circuit.
  ASIC internal error (VHVHDRM)	OK/NG	Displays malfunction status of ASIC internal circuit.
  ASIC communication error (VHVOV)	OK/NG	Displays malfunction status of ASIC internal circuit.
  ASIC communication error (VHVUV)	OK/NG	Displays malfunction status of ASIC internal circuit.
  ASIC communication error (VAAUV)	OK/NG	Displays malfunction status of ASIC internal circuit.
  ASIC communication error (SCANDONE)	OK/NG	Displays the status of ASIC communication error.
  ASIC communication error (ESTM)	OK/NG	Displays the status of ASIC communication error.
  ASIC communication error (GNDL)	OK/NG	Displays the status of ASIC communication error.
  ASIC communication error (VDDL)	OK/NG	Displays the status of ASIC communication error.
  ASIC communication error (RX OC/SC)	OK/NG	Displays the status of ASIC communication error.
  Voltage disconnection open circuit (Data packet)	OK/NG	Displays the status of ASIC communication error.
  Voltage disconnection open circuit (16Mhz)	OK/NG	Displays the status of ASIC communication error.
  Voltage disconnection open circuit (Slave)	OK/NG	Displays the status of ASIC communication error.
  Voltage disconnection circuit error (BALEVEN OC)	OK/NG	Displays open circuit status of voltage measuring circuit
  Voltage disconnection circuit error (BALODD OC)	OK/NG	Displays open circuit status of voltage measuring circuit
  ASIC (BALSW)	OK/NG	Displays open circuit status of voltage measuring circuit
  ASIC (MUXseq)	OK/NG	Displays the short circuit status of capacity adjustment circuit.
  ASIC (MUXtcs)	OK/NG	Displays the short circuit status of capacity adjustment circuit.
  ASIC (CnSWn)	OK/NG	Displays open circuit status of voltage measuring circuit
  MAX internal resistance cell number	—	Displays cell No. that shows maximum internal resistance. NOTE: Cell No. is shown 0 to 95. For comparison, Refer to Component Description.
  MIN internal resistance cell number	—	Displays cell No. that shows minimum internal resistance. NOTE: Cell No. is shown 0 to 95. For comparison, Refer to Component Description.
  Maximum cell internal resistance value	Ohm	Displays the highest cell resistance value among all cells.
  Minimum cell internal resistance value	Ohm	Displays the lowest cell resistance value among all cells.

  *1: The items are the same as the items of freeze frame data of 1st trip DTC.

  HIGH VOLTAGE BATTERY 2 (Sub CPU)

  Monitored item	Unit	Remark
  Minimum voltage cell No	—	Displays cell No. that shows minimum voltage. NOTE: Cell No. is shown 0 to 95. For comparison, Refer to Component Description.
  Relay status	Pre-charge/On/Off/Operating/Relay P check/Relay N check	Displays each relay status
  Data flash check	OK/NG	CPU data flash error is occurred
  Deep—Stop Mode Reset	OK/NG	Reset is occurred due to deep stop mode
  Power ON reset	OK/NG	Power ON reset is occurred
  Core voltage monitor reset	OK/NG	Power ON reset is occurred
  Low voltage indicator reset	OK/NG	Reset is occurred due to core low voltage detection circuit
  Clock monitor reset 2	OK/NG	Reset is occurred due to clock monitor
  Clock monitor reset 1	OK/NG	Reset is occurred due to clock monitor
  Clock monitor reset 0	OK/NG	Reset is occurred due to clock monitor
  External reset	OK/NG	Reset is occurred due to input from external terminal
  Watchdog reset 1	OK/NG	Reset is occurred due to watch dog timer
  Watchdog reset 0	OK/NG	Reset is occurred due to watch dog timer
  Software reset	OK/NG	Software reset is occurred
  Trap error	OK/NG	CPU trap is occurred (Exception / Abnormal interruption)
  CPU stack	OK/NG	CPU stack abnormality (overflow or underflow) is occurred.
  ROM check	OK/NG	CPU ROM area error is occurred.
  RAM check	OK/NG	CPU ROM area error is occurred.

  *1: The items are the same as the items of freeze frame data of 1st trip DTC.

DATA MONITOR

NOTE:

The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

WORK SUPPORT

ECU IDENTIFICATION

Parts No. of Li-ion batter controller is displayed.

Li-Ion BatteryPreparation. Vehicle Charging System