english german french spanish
Nissan

Nissan Ariya: Description

Nissan Ariya (FE0) 2023-2025 Service & Repair Manual / Electric Power Train / Vehicle Charging System / Description

Outline. Vehicle Charging System

Outline

  • The vehicle charging system consists of on-board charger, DC / DC converter, and high-voltage junction box.

    • The Nissan Ariya vehicle is charged using various chargers, charging cables, a quick charge port or a normal charge port equipped on the Nissan Ariya vehicle.

    • Supports quick charge and 6 kW normal charge.

  • A charge status indicator is installed in the center of instrument panel so that the charge status can be checked even from outside Nissan Ariya vehicle.

  • Adopted a charge port lamp that improves workability when charging.

Specifications

SPECIFICATIONS
Rated input voltage AC220V - AC230V (single phase)
Rated input frequency 50Hz/60Hz
Maximum rated current 32A
Sensitive current of GFI (Ground Fault Interrupter) circuit breaker in NISSAN Genuine portable type EVSE (Electric Nissan Ariya Vehicle Supply Equipment) 15mA
Charging modes / Type of connection
  • Mode 2 / Case B (Normal charge with NISSAN Genuine portable type EVSE (Electric Nissan Ariya Vehicle Supply Equipment) )

  • Mode 3 / Case B/C (Normal charge with public charging stand, etc)

  • Mode 4 / Case C (Quick charge)

Required installation (over currentprotection) The methods of protection against over current and over voltage shall be in accordance with national codes. Suitable over current protection devices for the wiring of houses or buildings shall be installed.
IP Degree  IP44: When the NISSAN EVSE or NISSAN Mode3 cable is connected to the normal charge port.
Operating temperature Same as Nissan Ariya vehicle operating temperature
Storage temperature Same as Nissan Ariya vehicle storage temperature
Altitude Up to 9,843 ft (3,000 m)
Applicable standard
  • SAE J1772: 2010

  • EN61851-1: 2011

  • EN61851-21: 2002

  • IEC61851-1: 2010

  • IEC61851-21: 2001

  • EN61000-6-1: 2007

  • EN61000-6-3: 2007

Adaptors Do not use an extension cable or electrical adaptor.

Time required for charging

Charge time is depending on the vehicle conditions

  • Li-ion battery charge level when charge is started.

  • Li-ion battery temperature

  • Type of available charger or connected power supply

  • Years of use of Li-ion battery

  • Usage of equipment that consume electricity, such as air conditioners

  • Operating condition of battery temperature control function

The estimated charge time is displayed on vehicle information display of combination meter according to signal from VCM.

Diagnosis System (cplc). Consult Function

CONSULT Function

FUNCTION

Diagnosis test mode Function
 
C/U identification information Displays parts No. of CPLC
Self-diagnosis result Displays trouble diagnosis result judged by CPLC*

*:When memory of CPLC is deleted, the following diagnosis information are also deleted

  • DTC

  • Freeze frame data

  • Corresponded operation history and operation count.

C/U identification information

Parts No. of CPLC is displayed.

SELF-DIAG RESULTS

Refer to DTC Index.

  • When self-diagnosis result displays "CURRENT"

    • system error is now occurred.

  • When self-diagnosis result displays "STORED"

    • system is recovered as normal now.

Freeze Frame Data (FFD)

The Freeze Frame Data stores the status of the vehicle when the DTC is detected and displays on CONSULT screen.

Freeze frame data item Function
Odometer/Trip meter Displays mileage when DTC is detected
DTC count Displays number of DTC is occurred.
 

© 2023-2025 Copyright www.niariya.com